Công ty TNHH TM DV Song Thành Công (STC) chúng tôi luôn tự hào là một trong những nhà cung cấp vật tư và thiết bị hàng đầu chuyên dùng cho ngành công nghiệp trong các dây chuyền sản xuất và trong các hệ thống điều khiển toàn bộ hệ thống hoạt động của nhà máy, xí nghiệp hay các sản phẩm của công nghệ cao và chất lượng.
Chúng tôi là công ty hàng đầu chuyên về Xuất Nhập Khẩu các thiết bị như: Cảm biến, Encoder, Relays, PLC, HMI, Inverter,Thiết bị đo nhiệt độ, áp suất, lưu lương, đo mức, motor, Pump…
Chúng tôi là đại lý phân phối của GASMET tại Việt Nam về các thiết bị Điện - Tự Động Hóa trong công nghiệp , hệ thống Building và hệ HVAC...
Xin giới thiệu đến Quý khách hàng sản phẩm của hãng GASMET :
Gasmet™ DX4000 is a portable FTIR gas analyzer which is typically used in stack emissions monitoring, comparison measurements, catalytic process control and other applications where multiple gas compounds need to be accurately monitored in hot & humid sample gas. The corrosion resistant sample cell is heated to 180 C, which ensures that the sample stays in gaseous phase even with high concentrations of H2O or corrosive gases.
Gasmet™ DX4000 comes equipped with easy-to-use Calcmet™ software, which can display the concentration results in ppm, mg/Nm3 or Vol-%. All measurement data can be stored for further analysis.
Gasmet™ DX4000 is typically set-up to measure H2O, CO2, CO, NO, NO2, N2O, SO2, NH3, CH4, HCl, HF and different VOC´s. Additional gases can be added without any hardware changes. Measurement ranges can be selected from sub-ppm until vol-% level.
Gasmet™ DX4000 can be supplied with the Gasmet™ portable sampling system. This system utilizes hot-and-wet measurement principle (no drying or dilution), which ensures that the analysis is done with a representative sample. The portable sampling unit can be optionally equipped with a ZrO2 sensor for accurate oxygen measurement.
Gasmet™ DX4000 has received the coveted MCERTS certification for stack emissions monitoring.
Gasmet™ DX4015 is a portable FTIR gas analyzer for ambient air analysis. Applications include for example in different research and occupational health applications. The key features of the Gasmet™ DX4015 include a high sensitivity sample cell for lowest possible detection limits and a built-in-pump, which means that there is no need to use a separate sampling system.
Gasmet™ DX4015 is typically set-up to measure a variety of different gases, including VOC´s, acids, aldehydes, and inorganic compounds such as CO, CO2, N2O. Up to 50 compounds can be measured simultaneously. Gasmet™ DX4015´s sample cell is heated to 50 C, which allows measurement to be done in conditions where high humidity is expected.
The Gasmet™ DX4015 is operated with an external portable laptop that runs the Calcmet™ software. This easy-to-use program both controls the analyser and does the actual analysis of the results.
Gasmet™ FCX is a wall-mounted gas analyser which combines the Gasmet™ Cx-series analyser with a built-in computer in a dust and moisture protected cabinet. The FCX – series analyzers are especially well suited for process gas monitoring or workplace air quality measurements.
Different sample cells are available, allowing the FCX – series to be used in a variety of different applications. Sample cell temperature can be either 50 °C (ambient air measurements) or 180 °C (process gas analysis).
Analysis results can be transmitted through galvanic isolated analog outputs (4-20 mA or 0-10 V) or digital protocols (MODBUS, PROFIBUS etc.). Relay controlled multipoint sampling system is also available for applications, where multiple sample points need to be monitored.
Gasmet CR-series are desktop analyzers for high sensitivity, high speed gas analysis. The CR-series FTIR gas analyzers are especially suitable for vehicle exhaust measurements, catalytic research, gas purity tests and other research applications.
The liquid nitrogen cooled MCT - detector in the CR-series offers the lowest possible detection limits and shortest measurement times. Large selection of different sample cell path lengths (from 1.0 cm to 10 m) is also offered in order to suit different measurement needs. Gasmet Technologies can also supply customized sampling units to match different requirements.
There are three different CR - models available:
Gasmet™ CR1000 FTIR gas analyzer features a stainless steel single pass sample cell for highest measurement ranges (vol - %). Sample cell is heated (as standard 180 °C) in order to keep the sample in gas phase.
Gasmet™ CR2000 FTIR Gas Analyzer has a small volume sample cell which combined with the LN2 cooled detector makes it an excellent instrument for very fast measurements. Typical uses include vehicle exhaust measurements where short response times and high sensitivity are needed.
Gasmet™ CR4000 FTIR Gas Analyzer has a high-sensitivity sample cell and a LN2 cooled detector which give lowest possible detection limits. It´s therefore well suited for applications where very low levels of detection are needed.
Lâm Hoài Diễm
[Cellphone]: 0916 635 755
[Email]: diem@songthanhcong.com
Head office: 110 Hoa Cuc Street, Ward 7, Phu Nhuan District, HCMC
TI + 84 8 35074676 FI +84 8 35173889
Không có nhận xét nào:
Đăng nhận xét